The Go Power Weekender ISW RV Solar Charging System 34282183 is a step down from the Go Power Solar Elite Charging System # 34282184 that you were previously recommended. The Weekender will come with a 1,500 watt inverter, transfer switch, solar controller and 190 watt solar panel. An inverter remote panel and solar control panel will allow you to monitor the power usage.
You will need a Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD49RR to charge your Lithium... view full answer...
Hey John, you'd need a new panel like the Progressive Dynamics Mighty Mini part # PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible.
There isn't a lower section replacement available for what you have that would allow it to work with lithium batteries.
You would not need to change your current transfer switch or add an additional one. view full answer...
Thanks for reaching out, Mark.
The Replacement Converter Section # PD4045CSV is designed to work with the Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel # PD4045KA which stays connected to the batter the whole time. It does not include a transfer switch if that's what you're asking.
If you're describing something else please let me know and I'll be happy to look into this further for you. view full answer...
The iRV RV Stereo part # 292-101809 would be a great and easy upgrade for the Furrion system you have currently. Since this can play music from a USB drive it would be perfect for what you mentioned. You could transfer your music files onto a USB thumb drive and then play the files from the stereo without needing data or wifi. view full answer...
Hey Jean, so it really depends on the rating of your current transfer switch if you should replace it with the part # PD64FR at same time as when you install the converter part # PD9280A.
The new converter is rated for up to 1,300 watts so your current transfer switch would need to be rated for at least that to get full advantage of the new converter. If not, then it would be a good idea also go with the new switch part # PD64FR which is rated for 2,000 watts. view full answer...
The transfer switches that we currently offer are either rated for 30 amp or 50 amp service and can't function properly if wired to a different amperage rating. For example, if your motorhome had 50 amp service and you installed the Furrion Automatic Transfer Switch # F50ATS and then wired a 30 amp generator to it, it wouldn't sense the generator since it's not putting out 50 amps for it to kick the switch over. The only option would be to plug the shore power cord into the generator using... view full answer...
Hey Steve, yes the Progressive Dynamics transfer switch part # PD64FR would be a super reliable and great option for your 2018 Thor Hurricane. PD makes really solid transfer switches that would be a lot more reliable than what you tried already.
Adding solar power to your setup would not affect the choice of a transfer switch either. view full answer...
Based on your information it sounds like the best option would be the Go Power Industrial Pure Sine Wave Inverter # 34278156. This is a 2,000 watt inverter which does not include a transfer switch. It uses pure sine wave technology to replicate household AC power and safely run your devices. You also have the option to add a remote like the # 34266886 or the # 34279999 which monitors voltage, output power, inverter status, and power saving mode. view full answer...
Yes, you still need to ground the # F30ATS which is listed in the instructions. Connect the chassis grounding 10AWG wire to the grounding terminal block on the inside of the transfer switch box. Use the 3/8” through hole to feed the wire through from the outside of the box directly to the terminal block. view full answer...
According to the owners manual for your 2015 Chevrolet Colorado 4x4 you are able to tow your front wheels on the wheel lift and rear wheels on the ground. You will also not need to remove your drive shaft or let your truck run when you do this. You simply need to switch the transfer case into Neutral so it will not turn the transmission and the front and rear driveshafts will be disconnected. view full answer...
Hello David. I can definitely point you in the right direction. We have quite a few options for an on/off switch. You can feel free to email me pictures of your switch. My email is jesse.morton@etrailer.com. I am happy to take a look and see if we have a match. I have also provided you with a link below that will show you our full selection of on/off switches. Let me know if there is anything else I can do to help. view full answer...
I reached out to Blue Ox and was able to confirm that the Blue Ox Base Plate Kit # BLU85CR would be a compatible fit for a 2023 GMC Canyon AT4X. If you haven't picked out the rest of your flat towing components then I have the following recommendations:
Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables and an adjustable head/shank.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This... view full answer...
Even keyless entry fobs will have an small physical key that you can pop out of the fob and use the physically lock/unlock the doors. With the battery being disconnected the fob won't work for unlocking/locking the doors. I've copied the steps below in order to get your 2021 Chevy Silverado 1500 with keyless entry ready to flat tow:
1. Position the vehicle being towed behind the tow vehicle, facing forward and on a level surface.
2. Securely attach the vehicle being towed to the tow vehicle.
3.... view full answer...
Yes, the Replacement Screen Frame # BVC0573-32 has a cutout where your switch can go if you have one.
Regarding the lights, the Command Electronics 328-K-1020BLSM2 was discontinued back in 2022. The only version that is still around with the switch is the 3" # 328-K-1003BLS. What you have measures 4-7/8" in diameter.
The closest thing we currently carry is the Optronics 12V RV LED Puck Light # ILL45CB which is 4-5/8" and would need to be wired to a separate switch. view full answer...
The Rampage Rock Rage Front Bumper for Jeep # RA97801 doesn't have a D-ring add-on option so you'd have to have a qualified fabricator weld D-rings in to the bumper if you wanted them. You'd also need to have that fabricator ensure that the bumper is properly secured enough to the frame to be able to tow from the D-rings.
If you end up being able to tow from the D-rings then you'll want either the Roadmaster # RM-035 (3/4" thick D-rings) or RM-035-1 (1" thick D-rings) and a Roadmaster... view full answer...
Hey Tom, yeah it does look like the Replacement Switch Kit for Solera Power RV Awnings # LC285500 will still work as a replacement for your Solera awning.
This switch will replace the switch on any 12v Solera awning, so it'll work fine with yours. I've also included a wiring diagram for the switch so you can take a look at how things will be wired up. view full answer...
To get your Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 monitor to only display active cameras you'll just need to complete the follow steps:
1. Click the menu button on the side of the monitor.
2. Press "Setup".
3. Press "Auto Display".
4. Select "Tri-View".
You can also turn off auto display if you don't want it switching from tri-view back to just the rear camera while driving.
If later on you want to add on a door camera you can use part # FCN48TASF and... view full answer...
Yes, the Optronics LED Mini Clearance or Side Marker Trailer Light # MCL13A2B will work with a dimmer switch. Make sure you use one designed for LEDs like the # 37215225. view full answer...
The wall controller is required to use the Furrion RV Tankless Water Heater # FR93FR. You will need to install it if you plan to use this water heater. view full answer...
No, we do not. The closest comparable option we do have is the Lippert High-Speed Power Stabilizer Jack item # LC298707 you were looking at. view full answer...